Mistakes and bugs on the board MiniMS rev 0.1
1. D15 is backwards on the silkscreen. Install D15 with the band towards the bottom of the board
2. C12 is not labeled on the silkscreen layer. It is the component just above U4
3. H1 is not labled on the silkscreen layer. It is the two pin holes below R6
4. U4 needs a ground on pin2, a jumper can be placed between pin2 and pin4 of U4
Mistakes and bugs on the board MiniMS rev 0.0
1. C12 is not labeled on the silkscreen layer. It is the component just above U4 and below XG2
2. MPX4250 mounting holes are off.
